Thu, Sep 24, 2020
AD 2020-19-02 Revises The Applicability, Requires Repetitively Inspecting Affected T/R Blades With The New Inspection Procedures
The FAA is superseding Airworthiness Directive (AD) 2000-22-19 for Eurocopter France (now Airbus Helicopters) Model SA330F, G, and J helicopters. AD 2000-22-19 required repetitively inspecting certain tail rotor (T/R) blades for skin debonding and a crack.
Since the FAA issued AD 2000-22-19, the inspection procedures have been revised. Additionally, the FAA is adding an affected part-numbered T/R blade and the FAA-validation for Model SA330F and G helicopters has been cancelled. This new AD revises the applicability, requires repetitively inspecting affected T/R blades with the new inspection procedures, and depending on the inspection results, repairing or replacing the T/R blade. This new AD also prohibits installing an affected T/R blade unless it has passed the inspections. The actions of this AD are intended to address an unsafe condition on these products. This AD becomes effective October 7, 2020.
Supplementary Information: This AD is a final rule that involves requirements affecting flight safety, and the FAA did not provide you with notice and an opportunity to provide your comments prior to it becoming effective. However, the FAA invites you to participate in this rulemaking by submitting written comments, data, or views. The most helpful comments reference a specific portion of the AD, explain the reason for any recommended change, and include supporting data. To ensure the docket does not contain duplicate comments, commenters should send only one copy of written comments, or if comments are filed electronically, commenters should submit them only one time.
Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will file in the docket all comments received, as well as a report summarizing each substantive public contact with FAA personnel concerning this rulemaking during the comment period. The FAA will consider all the comments received and may conduct additional rulemaking based on those comments.
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]