EAA Recreates Prize-Winning 1909 Blériot XI... While You Watch! | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Jul 26, 2007

EAA Recreates Prize-Winning 1909 Blériot XI... While You Watch!

Will It Fly On the 100th Anniversary?

by ANN Correspondent Jeff Pierson

Will it fly in 2009... and just how high? Some say it will be finished "when it is finished" and just fly in ground effect. Others suggest that the 100 year anniversary -- two years from now -- is an alluring goal, and 22 miles (40 km) over water is a proper re-enactment.

Re-creation has just begun at Airventure. This week you can see daily propeller carving...with a chain-saw! The electric chain saw did not exist in 1909, but volunteer Jerry Thornhill wields one with great aplomb, launching chips as he shapes the custom propeller for EAA's Blériot project. Five plies of mahogany, totaling 4 ¼ inches (11 cm) thick, are hewn into a propeller about 7 feet long (215 cm).

Parts of this airplane will hit Mach 0.437 -- the propeller tips, as they swing at a leisurely 1400 rpm. Jerry has been carving props for 30 years, and once produced a nine-footer in one week under duress, but at his tent workshop he carves when an audience appears, anytime between 9 am and 3 pm.

Two steps away in the same shop, another woodworker conjures clouds of finer sawdust. The fuselage will consist of "about 32 pieces", says volunteer Gordy Selke. He has just begun shaping them, carving the vertical crosspieces with a spindle sander.

About sixty paces north in the wingbuilding area, volunteers Ken and Helene Terrio have already lovingly finished ten of the twenty four ribs needed for the Blériot wing. Pieces of the remaining ribs have been sawn and sanded, so visit now to see the gluing and clamping.

The project foreman, A & P Gary Beuttner, says the copper fuel tank has been finished. Gary works part-time for EAA on such projects. A 25 hp Anzani engine arrived in parts carried to Oshkosh from France last year, in the personal luggage of the French donors. It will be assembled by Ted Mosman, who conjures such bits into motive power at the Kermit Weeks Hangar.

About that overwater re-enactment... Blériot's grandson Louis got wet on the 90 year anniversary only two minutes after departure.

This week is the opportunity for Airventure attendees to see history in the re-making. You can bet this story has just begun...

FMI: www.pbs.org/wgbh/nova/Bleriot/imag-nf.html

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC