NTSB Notes Maingear Serviced Prior To CRJ Gear-Up Landing | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Tue, Dec 23, 2008

NTSB Notes Maingear Serviced Prior To CRJ Gear-Up Landing

Air Wisconsin Plane Landed Without Left Main December 14

In its Preliminary Report issued this week, the National Transportation Safety Board notes a Bombardier CRJ200 that landed with its left maingear up at Philadelphia International Airport (PHL) December 14 had just been serviced by maintenance workers... during which time they may have failed to properly attach the main gear uplock assembly.

"Maintenance had been performed on both the left and right main landing gear systems prior to the incident flight," reads the Prelim. "Post-incident inspection of the aircraft revealed that, the upper attachment bolt for the left main landing gear uplock assembly, which is designed to be attached to both the uplock mechanism and the structure, was attached to the airplane structure only."

As ANN reported, the Air Wisconsin jet was on a repositioning flight after being serviced in Norfolk, VA. Originally scheduled to depart as a US Airways Express revenue flight, the aircraft was delayed for over three hours on the ground in ORF and passengers were transferred to other flights.

The NTSB report does not explicitly say whether the departure delay was related to the maintenance work on the jet's landing gear. The two pilots and one flight attendant onboard the 50-seat regional jet were unhurt in the emergency landing.

"The flight crew received indications of a left main landing gear problem prior to landing and stated that they completed the applicable Quick Reference Handbook (QRH) procedures, but were unable to lower the left main landing gear," the NTSB notes. "They elected to land with the nose and right main landing gear in the down and locked position and the left main landing gear up."

The on-scene investigation revealed scuff marks to the left wing tip and outboard end of the left aileron, with more extensive damage to the flaps on the left wing, which were ground down from the flap training edge, through the upper and lower skins, to the ribs.

FMI: www.ntsb.gov

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC