Mon, Apr 29, 2013
Work Continues On New Attraction At Kennedy Space Center
NASA's Kennedy Space Center Visitor Complex on Thursday began the two-day process of unwrapping the Atlantis orbiter from the protective shrink wrap that has encased the priceless artifact during construction of the $100 million Space Shuttle Atlantis attraction, set to open June 29.
Atlantis has been enclosed in 16,000 square feet of protective plastic shrink wrap since its Nov. 2 move from Kennedy Space Center to the Visitor Complex and into the 90,000-square-foot attraction, which has been under construction for 15 months. In a planned approach, specialists first cut the shrink wrap into sections and then lifted it away in a dramatic reveal of much of Atlantis, including the forward fuselage. The unwrapping process was expected to be completed on Friday.
Atlantis is raised 30 feet off the ground and rotated at a 43.21 angle as if orbiting Earth. When the attraction opens June 29, guests will have an up-close, 360-degree view of Atlantis from several different levels — the wear and tear of its 33 missions apparent on its protective external tiles.
Next week, Atlantis will be inspected and prepared for display as the final phase of work on the attraction continues. Beginning in May, the orbiter's payload bay doors will be opened, a meticulous three-week process, allowing guests to see inside the space shuttle's payload bay.
Meanwhile, assembly continues — with the aid of a 240-foot-tall crane — on two full-size, high-fidelity solid rocket boosters (SRBs), which, when vertically mated with a high-fidelity model of the external tank (ET), will form a dramatic, 184-foot-tall gateway under which visitors will pass to enter the Space Shuttle Atlantis attraction.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]