Tue, May 28, 2013
AD NUMBER: 2013-09-10
PRODUCT: All Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes.
SUBJECT: Airworthiness Directive 2013-09-10
ACTION: Final Rule
SUMMARY: The FAA is superseding an existing airworthiness directive (AD) for the products listed above. That AD currently requires repetitive inspections to detect cracking of the lower corners of the door frame and cross beam of the forward cargo door, and corrective actions if necessary. That AD also requires eventual modification of the outboard radius of the lower corners of the door frame and reinforcement of the cross beam of the forward cargo door, which terminates the existing repetitive inspections.
This new AD revises the compliance times for the preventive modification; adds certain inspections for cracks in the number 5 cross beam of the forward cargo door; and adds inspections of the number 4 cross beam if cracks are found in the number 5 cross beam, and corrective actions if necessary. For certain airplanes, this new AD also adds a one-time inspection for airplanes previously modified or repaired, and a one-time inspection of the reinforcement angle for excessive shimming or fastener pull-up, and corrective actions if necessary.
This AD was prompted by additional reports of fatigue cracking in the radius of the lower frames and in the lower number 5 cross beam of the forward cargo door. The FAA is issuing this AD to prevent fatigue cracking of the lower corners of the door frame and number 5 cross beam of the forward cargo door, which could result in rapid depressurization of the airplane.
DATES: This AD is effective June 28, 2013.
FMI: AD
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]