Spacecraft Assembled, Rolled, Raised
SpaceX has lifted their Falcon 9 launch vehicle to vertical at
Space Launch Complex 40 at Cape Canaveral. The spacecraft standing
at the pad represents a full flight-ready Falcon 9 launch vehicle
with Dragon qualification spacecraft.
Taking the rocket vertical was the most recent milestone in a
series of key launch prep activities at the Cape in recent weeks.
SpaceX fully integrated all flight hardware, mating the first
stage, second stage and Dragon qualification spacecraft in the
SpaceX hangar at SLC-40. The components include (l-r) the Dragon
spacecraft qualification unit, second stage with Merlin Vacuum
engine, first stage with nine Merlin 1C engines.
The Falcon 9 launch vehicle and Dragon spacecraft was fully
integrated in the SpaceX hangar at Space Launch Complex 40 (SLC-40)
in Cape Canaveral, FL, before the entire vehicle was raised and
placed on to the mobile transporter.
The following days involved connecting the vehicle to the
transporter's support systems, including lines for RP-1 fuel,
liquid oxygen (LOX), gaseous helium and nitrogen, as well as
numerous electrical and data connections. These attach to the
vehicle through three umbilical connectors - two at the base of the
first stage on opposite sides, and one at the top of the interstage
that supplies the second stage. They remain connected until
liftoff, when they detach and pull away from the departing vehicle,
just as with the Falcon 1.
After verifying all the connections (leak checking the fluid and
gas systems, and continuity checking the electrical systems), the
team joined the entire flight-ready Falcon 9 to the launch support
system for the first time. The process went very smoothly thanks to
the efforts of our hardworking team down at the Cape.
Next, The hangar doors were opened, and the entire system was
rolled out to the launch platform. There, it was anchored to the
launch mount, and connected the combined transporter/rocket to the
ground-based feeds and support. Another set of system checks was
conducted to verify those systems - the same set of liquids,
gasses, electrical and data.
On the morning of Saturday 20 February, we brought the vehicle
to vertical, and began preparations for tanking and static test
firing.
Now, the vehicle and launch pad will be prepared for static
firing. During the test firing we will collect data from numerous
sensors on and around the vehicle, then review all data thoroughly
prior to launch.