Thu, Dec 01, 2005
Applicability:
Model AS 332 helicopters versions C, C1, L, and L1, equipped with
plug doors.
Requirement: 1. Check for interference between
the step of the middle-rail stop assembly and the plug door
fitting, in accordance with paragraph 2.B. of Eurocopter AS 332
Alert Service Bulletin (ASB) No. 52.00.33 R1. If no interference is
evident, no further action is required.
2. In the case of plug doors where MOD 0725366 has not been
embodied, that are affected by interference indicated by wear
between the step of the rail of the stop assembly and the shaft of
the fitting: If there is interference, with or without shaft
rotation, comply with the instructions in paragraph 1.E.2.a.1. of
ASB No. 52.00.33 R1. In all cases, opening and closing the plug
door in flight is permitted only in an emergency in compliance with
the instructions of Note 3 in paragraph 2 of ASB No. 52.00.33 R1.
Affix a label to the immediate vicinity of the inner door handles,
indicating this restriction, in red text.
3. In the case of plug doors where MOD 0725366 has been embodied,
that are affected by interference indicated by wear between the
step of the rail of the stop assembly and the shaft of the fitting:
If there is interference, with or without shaft rotation, comply
with the instructions in paragraph 1.E.2.a.2. of ASB No. 52.00.33
R1.
Note: DGAC AD F-2004-142 R1 refers.
Compliance: 1. At the next ALF-check after 7
December 2005, unless already accomplished.
2. Before further flight, unless already accomplished.
3. Within the next 50 flight hours, and thereafter at intervals not
to exceed 50 flight hours.
This amendment becomes effective on 7 December 2005.
Background:
The manufacturer received a report of the loss of a right hand plug
door from an AS 332 L helicopter during in-flight door operation.
The aircraft was performing hover flight when a crew member
unlocked the door for aerial photography. The door was not found,
and an examination of the elements on the airframe revealed that
this event was caused by a hinge failure of the stop assembly of
the middle rail. Amendment 1 is issued in response to a revision of
the related DGAC AD, which introduces Revision 1 of the Requirement
document.
More News
DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]
"General aviation is at the forefront of developing and introducing innovative technologies that will transform the entire aviation industry..." Source: Kyle Martin, Vice President>[...]
Direct Straight line flight between two navigational aids, fixes, points, or any combination thereof. When used by pilots in describing off-airway routes, points defining direct ro>[...]
Aero Linx: Women in Corporate Aviation Women in Corporate Aviation support individuals seeking career advancement and professional development in the business aviation industry. Me>[...]
“We would like to thank the many volunteers that help throughout the year to pull off the event, as well as the several reviewers, judges, and SURVICE staff that provide team>[...]
ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)
See All