SpaceX Falcon9/COTS1 Launch Delayed By Small Cracks | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Tue, Dec 07, 2010

SpaceX Falcon9/COTS1 Launch Delayed By Small Cracks

Falcon 9 Launch Attempt Now Scheduled for Wednesday Morning

ANN Update 12.07.2010 2016 EST: NASA announced late Tuesday that the first demonstration flight of SpaceX's Falcon 9 rocket and Dragon capsule for NASA's Commercial Orbital Transportation Services program has been scheduled for Wednesday, Dec. 8, from Cape Canaveral Air Force Station in Florida. The launch window extends from 0900 to 1222 EST.

During a routine inspection this week, SpaceX engineers observed two small cracks in the rocket's second stage engine nozzle. SpaceX completed repairs to the cracked nozzle Tuesday.

Original Story: News and Analysis by Wes Oleszewski

Tuesday's planned launching of SpaceX's second Falcon 9 rocket was scrubbed early Monday. The reason for the scrub was that engineers discovered two small cracks in the aft end of the 2nd stage engine nozzle expansion.

The expansion nozzle on the second stage's Merlin engine is made of a niobium alloy and is used to enhance performance in the vacuum of space. That enhancement was designed to allow the launch vehicle to reach the International Space Station (ISS) or to loft heavy payloads and deep-space vehicles. Since this mission of the Falcon 9 is intended to place the Dragon spacecraft into a simple low earth orbit that is of a far lower incline that that of the ISS, the enhancement value of the nozzle is not required. Speculation, independent of SpaceX, is that if the nozzle extension were to further fracture after stage separation there would be little impact on the overall mission.

Although the nozzle extension is nine feet tall and has a base diameter of eight feet its average wall thickness is less than 1/3 of a millimeter, or slightly thicker than the wall of a soda pop can. Technicians will be able to use small grinding and cutting tools to cut away and smooth the damaged areas. The real question being if the cracks are part of a local anomaly or if they represent a larger problem.

SpaceX, as of this writing, has elected to announce a final launch decision on Tuesday evening after greater study of the issue. If officials are satisfied with the the fixes the Falcon 9 could make a launch attempt as early as Wednesday.

FMI: www.spacex.com

 


Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC