AD: Pacific Aerospace Limited Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Sat, Nov 06, 2021

AD: Pacific Aerospace Limited Airplanes

AD 2021-21-11 Requires Inspecting The Engine Mount, The Temperature Probe, And The Reversing Cable For Damage

The FAA is adopting a new airworthiness directive (AD) for certain Pacific Aerospace Limited Model 750XL airplanes.

This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as insufficient clearance between the engine mount, the Beta control rod, and the inter-turbine temperature (ITT) sensing probe that could lead to chafing damage. This AD requires inspecting the engine mount, the temperature probe, and the reversing cable for damage, and taking any necessary corrective actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective December 10, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Pacific Aerospace Limited Model 750XL airplanes. The NPRM published in the Federal Register on July 28, 2021 (86 FR 40381). The NPRM was prompted by MCAI originated by the Civil Aviation Authority (CAA), which is the aviation authority for New Zealand. The CAA of New Zealand has issued AD DCA/750XL/35, effective date February 7, 2019 (referred to after this as “the MCAI”), to correct an unsafe condition for certain Pacific Aerospace Limited Model 750XL airplanes.

The MCAI states:

DCA/750XL/35 is prompted by a review of the engine installation procedures, which identified that the clearance between the engine mount, the Beta control rod and the inter-turbine temperature (ITT) sensing probe could be insufficient and result in chafing damage. The [CAA] AD is issued to introduce the instructions in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/102 issue 2, dated 5 November 2018.

You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.17.24): Very High Frequency

Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]

ANN's Daily Aero-Linx (05.17.24)

Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: ANN Visits Wings Over The Rockies Exploration Of Flight

From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]

Airborne Affordable Flyers 05.16.24: PRA Runway, Wag-Aero Sold, Young Eagles

Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC