Mon, Jul 24, 2006
Aero-Tips!
A good pilot is always learning -- how many times have you
heard this old standard throughout your flying career? There is no
truer statement in all of flying (well, with the possible exception
of "there are no old, bold pilots.")
Aero-News has called upon the expertise of Thomas P. Turner,
master CFI and all-around-good-guy, to bring our readers -- and us
-- daily tips to improve our skills as aviators. Some of them, you
may have heard before... but for each of us, there will also be
something we might never have considered before, or something that
didn't "stick" the way it should have the first time we memorized
it for the practical test.
Look for our daily Aero-Tips segments, coming each day to
you through the Aero-News Network.
Aero-Tips 07.24.06
One very helpful workload-reduction tool I employ in flight is
what I call the Altitude Critical Area, or
ACA. The idea for the ACA comes from the airline industry and most
notably author Robert Sumwalt, who coined the term to describe the
final portion of an instrument approach. I've adopted the term but
expanded on the concept greatly in teaching single-pilot resource
management (SPRM).
An Altitude Critical Area is any range of altitude --
- within 1000 feet of the ground, and/or
- within 1000 feet of a level-off altitude (whether on climb or
descent) until established and trimmed on that altitude.
The idea is to reduce workload by limiting nonessential tasks
when in an ACA. Don't be calling ahead to the FBO for a fuel load
or a rental car when flying in an ACA. Avoid pulling out charts or
briefing yourself for an approach or programming the GPS when in an
ACA. In almost all cases these sorts of tasks can wait until you're
established and trimmed on level flight, or you land or fly out of
an ACA. Evoke a "sterile cockpit" when inside
an ACA, after first briefing your passengers on what a sterile
cockpit means, and how and when you'll declare sterile cockpit
rules to be effective on board your aircraft.
Pilot workload is high enough on takeoff, on approach and
landing, and during intermediate and final level-offs without
adding the distractions of passenger conversation and extraneous,
non-time-sensitive tasks.
Aero-tip of the day: VFR or IFR, observe
Altitude Critical Areas to reduce workload and increase safety.
More News
Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]
A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]
Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]
Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]
From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]