AD: Boeing | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Jan 30, 2007

AD: Boeing

AD NUMBER: 2007-02-18
MANUFACTURER: Boeing
SUBJECT: Airworthiness Directive 2007-02-18
SUMMARY:
The FAA is superseding an existing airworthiness directive (AD) that applies to certain Boeing Model 767-200, -300, and -300F series airplanes. That AD currently requires an inspection of visually accessible areas for indications of overheating of the heater tape attached to the potable water fill and drain lines in the forward and aft cargo compartments, exposed foam insulation or missing or damaged protective tape around the potable water fill and drain lines, and debris or contaminants on or near the potable water fill and drain lines. That AD also requires corrective action, as necessary. This new AD requires repetitive inspections of the forward and aft cargo compartments, as applicable, for discrepancies of the potable water supply and gray water drain lines; and applicable corrective actions if necessary. This AD also requires replacing the heater tapes on the potable water supply and gray water drain lines of the forward and aft cargo compartments, as applicable, with new ribbon heaters, or deactivating and removing any defective heater tape and wrapping the drain line with foam insulation; either action ends the repetitive inspections. This AD results from a report of a fire in the aft cargo compartment. We are issuing this AD to prevent overheating of the heater tape on potable water fill and drain lines,which may ignite accumulated debris or contaminants on or near the potable water fill and drain lines, resulting in a fire in the airplane.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC