NTSB Cites Pilot Error In 2010 Palo Alto Fatal Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sat, Nov 26, 2011

NTSB Cites Pilot Error In 2010 Palo Alto Fatal Accident

Three Fatally Injured When Aircraft Went Down In Heavy Fog

The NTSB has issued its probable cause report in the February, 2010 accident which resulted in the fatal injury of three employees of the Tesla automobile company and sparking fires in a residential neighborhood. The board determined that the probable cause of the accident was the pilot’s failure follow the standard instrument departure as instructed, and his failure to attain a sufficient altitude to maintain clearance from power lines during takeoff in instrument meteorological conditions.

Cessna 310 File Photo

According to the report, the pilot  of the Cessna 310 departed the airport in near-zero visibility instrument meteorological conditions, and shortly after takeoff, struck a power pole and power lines before impacting terrain. Review of recorded air traffic control tower (ATCT) transmissions revealed that the pilot was initially given his IFR clearance to turn right to a heading of 060 degrees and climb to 3,000 feet. Shortly after verifying his IFR clearance, the pilot received his IFR release from the ATCT controller and was informed that the runway was not visible to the controller. The controller further informed the pilot that takeoff was at his own risk. Shortly after, the controller notified the pilot that he had two minutes for his IFR release, before it expired. The pilot stated that he did not hear a "cleared for takeoff" instruction from the controller. The controller responded that he could not clear the pilot for takeoff, due to not having the runway environment in sight and that "the release is all yours and it's at your own risk sir." The pilot acknowledged the transmission and proceeded to take off. One witness, who was adjacent to the accident site, reported that she observed an airplane “suddenly appear from the fog” left of her position. The witness stated that she continued to watch the airplane fly in a level or slightly nose up attitude until it impacted power lines.

Accident site evidence was indicative of a level impact with a power pole about 50 feet AGL and at a high airspeed. All major structural components of the airplane were located within the wreckage debris path. Examination of the airframe, engines and propellers disclosed no evidence of any preimpact mechanical anomaly. Weather conditions reported five minutes prior to the accident were wind variable at 5 knots, visibility 1/8th mile, fog, and vertical visibility of 100 feet agl. Weather conditions recorded by the ATCT 11 minutes after the time of the accident were visibility 1/16th mile, fog, and a vertical visibility of 100 feet agl.

Local law enforcement provided recordings from a sound recording system, which captured the accident sequence. The recordings were coupled with airport surveillance radar to interpolate a flightpath for the airplane. The interpolated flightpath indicated an approximate 45-degree left turn shortly after departure to the area of initial impact with the power pole and power lines. A sound spectrum study determined both engines were operating near full power.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC