Thu, Jun 11, 2009
SAFO Calls For A Constant Angle Of Descent For Night IFR
The FAA has issued a Safety Alert
For Operators (SAFO) for Parts 121 and 135 Operators using Constant
Angle of Descents techniques for nonprecision approaches. The
alert was written after an operator conducting a nonprecision
approach at night in instrument meteorological conditions (IMC)
conditions failed to control their descent rate while conducting
the approach procedure resulting in the airplane crashing short of
the runway.
According to the official FAA document:
"During a nonprecision approach procedure, the descent from the
final approach altitude to the minimum descent altitude (MDA)
requires disciplined piloting technique and increased situational
awareness to accommodate the pilot workload during this segment of
the approach. As the complexity of the approach procedure
increases, such as multiple step-down fixes or a circling approach,
the pilot’s workload increases. Environmental concerns such
as night operations and weather conditions at minimums provide a
cumulative affect on pilot workload. The workload under the
aforementioned conditions increases significantly for part 135
single pilot operations. Therefore, operators should evaluate and,
if necessary, implement appropriate procedures to reduce workload
issues applicable to nonprecision approaches.
Such procedures should include the
use of vertical navigation (VNAV) (if equipped) during nonprecision
approaches, as a means to achieve a constant angle of descent
approach profile from the final approach fix (FAF) to MDA. If the
airplane is not VNAV equipped, the operator should develop
procedures that address approach profile techniques using a
stabilized constant angle of descent from the FAF to arrive at the
published MDA prior to the published visual descent point (VDP). If
the approach does not have a published VDP, the flightcrew may
determine a point along the course between the FAF and missed
approach point that would be appropriate for a VDP. With the runway
environment in sight, and at the published VDP or established on
glidepath by means of a visual landing aid or vertical guidance
(VNAV equipped), the flightcrew may begin a normal descent from MDA
to the landing runway.
Operators should place a strong emphasis in their procedures
relative to altitude management throughout the approach procedure.
Particular attention should focus on methods and procedures
established for use by the flight crew to manage their descent and
maintain published altitudes along with appropriate descents from
altitudes to either the next altitude or the landing runway, as
appropriate."
The FAA recommends that Part 121 Directors of Safety and
Directors of Operations, part 135 Directors of Operations, and
Training Managers should perform a thorough review of their General
Operations Manual (GOM) and training program to evaluate and, if
necessary, develop and implement procedures for the use of constant
angle descent techniques during nonprecision approach procedures.
The use of constant angle of descents techniques should be a focal
point during all flightcrew training, testing and checking.
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]