Sat, May 08, 2004
Cessna 208 Series Aeroplanes
AD/CESSNA 208/15 Wing Struts Upper Attachment Bolts 7/2004`DM
Applicability: Model 208
aircraft, serial numbers 20800370 and 20800371. Model 208B
aircraft, serial numbers 208B1034 through 208B1043, 208B1045,
208B1046, and 208B1048.
Requirement: 1. Check that part number
MS24665-360 cotter pin is installed on each part number MS 17826-14
nut on the upper wing strut attach fittings, and that part number
MS24665-357 cotter pin is installed on each part number MS17826-12
nut on the lower wing strut attach fittings; in accordance with
Cessna Special Service Project No. SSP04-2, dated 5 April 2004. The
applicable aircraft maintenance manual also addresses the
issue.
2. If any part number MS24665-360 or part number MS24665-357 cotter
pin is not
installed, refer to SSP04-2, and: a. Tighten the corresponding nut,
part number MS17826-14 or part number MS17826-12, align nut
castellations and cotter pin hole; and, b. Install the
corresponding part number MS24665-360 or part number MS24665-357
cotter pin.
Note: FAA AD 2004-08-17 Amdt 39-13587 refers.
Compliance: 1. Within 10
hours time in service after 12 May 2004, unless already
accomplished. 2. Before further flight after the Requirement 1
inspection. This Airworthiness Directive becomes effective on 12
May 2004.
Background: The FAA received a report of a
Model 208 aircraft having loose or improperly ocked nuts on
the wing struts upper attachment bolts. Loss of attachment nut(s)
could lead to failure of the wing structure with consequent loss of
control of the aircraft.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]