NTSB Prelim: Velocity SE RG | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Oct 29, 2021

NTSB Prelim: Velocity SE RG

(Aircraft) ...Pitched Up, Climbed About 300 Ft, Then Descended Nose-Down In A Right Spiral

Location: Titusville, FL Accident Number: ERA22FA015
Date & Time: October 14, 2021, 15:51 Local Registration: N755V
Aircraft: Velocity SE RG Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On October 14, 2021, about 1551 eastern daylight time, an experimental, amateur-built Velocity SE RG, N755V, was destroyed when it was involved in an accident near Titusville, Florida. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot owned the airplane and based it at Space Coast Regional Airport (TIX), Titusville, Florida.

According to witness statements, radar data and airport surveillance video, the airplane flew uneventfully from TIX to Sebastian Municipal Airport (X26), Sebastian, Florida during the day of the accident. While at X26, at the airplane kit manufacturer’s facility, the pilot replaced a landing gear up switch fuse as the landing gear was not retracting. The replacement corrected the issue and then the pilot removed the pilot seat and rear seat behind the pilot seat. He left the rear seat at the facility so that maintenance technicians could match color and specifications as the pilot planned to have the interior aesthetics renovated the following month. He then reinstalled the pilot seat and departed X26 uneventfully at 1528 for the return flight.

As the airplane approached runway 9 at TIX, on short final approach, it pitched up, climbed about 300 ft, then descended nose-down in a right spiral. The airplane impacted a grass area about 400 ft right of the runway centerline, and about 2,000 ft from the beginning of the runway. A postcrash fire consumed a majority of the wreckage.

The wreckage came to rest upright, oriented about a 230° magnetic heading, and no debris path was observed. The cockpit and cabin were mostly consumed by fire. The wreckage was further examined following recovery to a salvage facility. The flight control stick was not recovered. The pilot’s seat was identified, and the four bolts and their respective hard points remained attached. The pilot’s seat pin was also identified, but the seat frame was bent and separated, consistent with impact forces. A Grand Rapids primary flight display and multifunction display were recovered and retained for data download. The left aileron separated from the wing and was recovered near the wing.

The right aileron also separated from the right wing and was recovered near its wing. Aileron control continuity was confirmed from the separated ailerons through cables, to a bellcrank, to torque tubes, to the cockpit. The canard spar remained intact and fire damage; however, the left and right elevators were not recovered and presumed destroyed in the fire. The elevator pushrod section that connected to the control stick was recovered with no threaded rod end engaged, and the rod end was not recovered. The pushrod section was retained for metallurgical examination. Continuity of the elevator was confirmed through torque tubes, with the exception of the retained pushrod section, to the cockpit. The elevator trim actuator was destroyed, and the preimpact elevator trim setting could not be determined. The left rudder was identified, and the right rudder was not recovered and presumed destroyed. The left rudder bellcrank remained intact and its cable exhibited a broomstraw separation.

The engine came to rest upright, separated from the airframe. The three composite propeller blades remained attached to the hub and all three blades separated about 12 inches from their respective roots. The top spark plugs were removed; their electrodes were intact and light gray in color. Borescope examination of the cylinders did not reveal any anomalies. The rear accessory section sustained thermal damage. The engine was retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

Airborne-Flight Training 05.09.24: ERAU at AIAA, LIFT Diamond Buy, Epic A&P

Also: Vertical Flight Society, NBAA Maintenance Conference, GA Honored, AMT Scholarship For the first time, students from Embry-Riddle’s Daytona Beach, Florida, campus took t>[...]

ANN's Daily Aero-Term (05.07.24): Hazardous Weather Information

Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

NTSB Final Report: Cessna 150

(FAA) Inspector Observed That Both Fuel Tanks Were Intact And That Only A Minimal Amount Of Fuel Remained In Each Analysis: According to the pilot, approximately 8 miles from the d>[...]

Aero-News: Quote of the Day (05.08.24)

“Pyka’s Pelican Cargo is unlike any other UAS solution on the market for contested logistics. We assessed a number of leading capabilities and concluded that the Pelica>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC