AD: Various Restricted Category Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Fri, Aug 09, 2013

AD: Various Restricted Category Helicopters

AD NUMBER: 2013-13-06

PRODUCT: Arrow Falcon Exporters, Inc. (previously Utah State University); Firefly Aviation Helicopter Services (previously Erickson Air-Crane Co.); California Department of Forestry; Garlick Helicopters, Inc.; Global Helicopter Technology, Inc.; Hagglund Helicopters, LLC (previously Western International Aviation, Inc.); International Helicopters, Inc.; Precision Helicopters, LLC; Robinson Air Crane, Inc.; San Joaquin Helicopters (previously Hawkins and Powers Aviation, Inc.); S.M.&T. Aircraft (previously US Helicopters, Inc., UNC Helicopter, Inc., Southern Aero Corporation, and Wilco Aviation); Smith Helicopters; Southern Helicopter, Inc.; Southwest Florida Aviation International, Inc. (previously Jamie R. Hill and Southwest Florida Aviation); Tamarack Helicopters, Inc. (previously Ranger Helicopter Services, Inc.); US Helicopter, Inc. (previously UNC Helicopter, Inc.); West Coast Fabrication; and Williams Helicopter Corporation (previously Scott Paper Co.) Model HH-1K, TH- 1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P Helicopters; and Southwest Florida Aviation Model UH-1B (SW204 and SW204HP) and UH-1H (SW205) Helicopters.
SUBJECT: Airworthiness Directive 2013-13-06
ACTION: Final Rule

SUMMARY:  This AD requires creating a component history card or equivalent record for each main rotor grip (grip); determining and recording the total hours time-in-service (TIS) for each grip; visually inspecting the upper and lower tangs of the grip for a crack; inspecting the grip buffer pads for delamination and if delamination is present, inspecting the grip surface for corrosion or other damage; inspecting the grip for a crack using ultrasonic (UT) and fluorescent penetrant inspection methods; and establishing a retirement life for certain grips.

This AD was prompted by three in-flight failures of grips installed on Bell Helicopter Textron (Bell) Model 212 helicopters, which resulted from cracks originating in the lower main rotor blade bolt lug. The actions are intended to prevent failure of the grip, separation of a main rotor blade, and subsequent loss of control of the helicopter.

DATES: This AD is effective September 10, 2013.

FMI: AD

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC