Expedition 16 Spacewalkers Wrap Up Tricky Excursion | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Jan 30, 2008

Expedition 16 Spacewalkers Wrap Up Tricky Excursion

Whitson, Tani Repair Problem To Power Generation System

Let there be light... onboard the International Space Station, that is. Early Wednesday afternoon, Expedition 16 Commander Peggy Whitson and Flight Engineer Dan Tani finished a seven hour, 10 minute spacewalk outside the ISS, to make repairs on the starboard side of the truss structure.

NASA reports the spacewalkers successfully removed and replaced a Bearing Motor Roll Ring Module (BMRRM) that experienced electrical failure December 8. The BMRRM, or "broom," drives the solar arrays as they tilt towards the sun, maximizing power generation.

While the panels continued to produce energy, the faulty motor prevented the panels on the station's right side from tracking the sun, curbing the station's power-generation capabilities.

Mission Control reported good electrical continuity to the new BMRRM. While spacewalkers were still outside, flight controllers completed a planned three-degree rotation and then did a 360-degree rotation of those solar wings. NASA engineers pronounced the repairs a success, stating the station's right-side solar power module is now generating enough power to support the planned deliveries of the Japanese "Kibo" science module to the station in March and April.

"Yee haw," said Whitson, when Mission Control told her the repair was successful. "Thanks a lot."

"Great. Fantastic," echoed Tani, reports The Houston Chronicle.

The excursion was somewhat riskier than other spacewalks, as the astronauts had to work in close proximity to the high-voltage solar panels. The spacewalkers could only work while the station was in darkness... as when sunlight hits the panels, dangerously high levels of electricity spike through the cables they had to handle.

The motor is part of the Beta Gimbal Assembly, which experienced electrical failures December 8. Including pauses for the daylight parts of orbit, the removal and replacement of the BMRRM took about three hours.

The second major task of the spacewalk was inspection of the starboard Solar Alpha Rotary Joint (SARJ), which causes the starboard solar wings to rotate in a paddlewheel-like motion to keep the arrays pointed toward the sun. Previous inspections revealed contamination and debris inside that joint. Eight SARJ covers were removed for Wednesday's inspection.

Station Flight Engineer Yuri Malenchenko helped the crew with suiting up and provided other support. Astronaut Tom Marshburn was the ground intravehicular officer. He was in the station flight control room in Houston's Mission Control Center, acting as spacewalk choreographer.

Once tasks their tasks were completed and after cleanup the spacewalkers re-entered the Quest airlock and closed its hatch. The beginning of repressurization at 1206 EST marked the official end of the spacewalk.

(Photo courtesy of NASA TV)

FMI: www.spaceflight.nasa.gov

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC