FAA Issues SAIB For PA-28 Fuel Selectors | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Mon, Jul 14, 2014

FAA Issues SAIB For PA-28 Fuel Selectors

Can Bind During Tank Switch, Leading To Fuel Starvation

The FAA has issued a Special Airworthiness Information Bulletin (SAIB) related to an issue with the fuel selector valve installed on Piper Models PA-28-140, PA-28-150, PA-28-160, PA-28-180, PA-28R-180, and PA-28R-200 airplanes.

According to the SAIB, the fuel selector valve can be inadvertently switched off and/or may bind when switching fuel tanks and can cause a loss of power in flight. This SAIB also recommends the installation of a fuel selector valve cover designed to prevent inadvertently selecting the off position and the maintenance of fuel selector valves to prevent their binding.

The FAA has received a report of a pilot inadvertently switching off a fuel selector valve while landing a Piper Model PA-28-180C airplane, in December 2011, resulting in a crash with one serious injury and substantial airplane damage. The incident was attributed to the pilot inadvertently selecting the off position of the fuel selector valve and a lack of fuel selector valve maintenance.

To reduce the possibility of inadvertent shutoff and/or binding of fuel selector valves in flight, we recommend that owners and operators of Piper. Models PA-28-140, PA-28-150, PA-28-160, PA-28-180, PA-28R-180, and PA-28R-200 airplanes:

  • Become fully familiar with the operation of their airplane’s fuel selector valve, including the clock locations of the left tank, right tank and off positions and the feel of a fuel selector valve, when the valve handle is rotated, free from the onset of binding and arresting only at the detent for each tank and off position.
  • Replace fuel selector valve covers with a design that utilizes a lockout device for the selection of a valve’s off positions, as addressed by Piper Service Bulletin (SB) 840A, dated 7 November 2013
  • Inspect and maintain fuel selector valves in accordance with Piper SB 355, dated 5 Jun 1972.

The FAA also recommends that pilots ensure a flat landing site is available whenever switching fuel tanks and check before landing to ensure that an airplane’s fuel selector valve is positioned on the fullest tank to reduce the possibility of a crash when switching a fuel selector valve.

(Image from file)

FMI: SAIB

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC