Sun, Nov 15, 2020
AD 2020-22-15 Requires An Inspection Of The Overwing Floor Beams
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-10-10 and DC-10-10F airplanes, Model DC-10-15 airplanes, Model DC-10-30 and DC10-30F (KC-10A and KDC-10) airplanes, Model DC-10-40 and DC-10-40F airplanes, Model MD10-10F and MD-10-30F airplanes, and Model MD-11 and MD-11F airplanes. This AD was prompted by reports of cracked floor beams and floor beam supports in the area of the overwing exit doors located at certain stations (STA). This AD requires an inspection of the overwing floor beams for any repair, repetitive inspections of the overwing floor beams and floor beam supports at certain STA on the left and right sides for any crack, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective December 18, 2020.
Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model DC-10-10 and DC-10-10F airplanes, Model DC-10-15 airplanes, Model DC-10-30 and DC-10-30F (KC-10A and KDC-10) airplanes, Model DC-10-40 and DC-10-40F airplanes, Model MD-10-10F and MD-10-30F airplanes, and Model MD-11 and MD-11F airplanes. The NPRM published in the Federal Register on August 25, 2020 (85 FR 52287). The NPRM was prompted by reports of cracked floor beams and floor beam supports in the area of the overwing exit doors located at certain STA. The NPRM proposed to require an inspection of the overwing floor beams for any repair, repetitive inspections of the overwing floor beams and floor beam supports at certain STA on the left and right sides for any crack, and applicable on-condition actions.
The FAA is issuing this AD to address potential undetected overwing floor beam cracks that could grow in length until the floor beam severs, and, if limit load is applied with two adjacent severed floor beams, could adversely affect the structural integrity of the airplane, which could result in the loss of primary control systems and lead to reduced controllability of the airplane.
More News
Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]
Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]
Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]
From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]
Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]