Mon, Feb 08, 2016
Fully Automatic Approach Up To Go-Around Decision And Final Rig Landing Assistance
EASA has granted certification to Airbus Helicopters for the Rig’N Fly (Rig Integrated GPS approaches with eNhanced Fly-ability and safetY), an avionics enhancement designed to provide automatic rig approaches for offshore operations. First developed on H225, it will also be implemented on H175 (end 2016) and on H160.
Rig’N Fly uses a combination of sensors (GPS, barometric altimeter, radar altimeter, weather radar, etc.) to provide enhanced flight precision and situational awareness for automatic VMC and IMC rig approaches. The system reduces workload for pilots, allowing them to focus on monitoring flight parameters and the outside environment.
This new mode also includes offset approaches, which can be tailored according to weather conditions and oil rig environment for the safest, standardized approach, placing the helideck in the most easily visible position for the crew.
“Rig’N Fly procedures are of the utmost importance to ensure reliable operations and the safest flight conditions possible, and this is an area where Airbus Helicopters continues to focus its developments,” said Marie-Agnes Veve, head of the Super Puma and H225 programme. “With the Rig’N Fly, almost the entire approach procedure is automated, a key element in ensuring that our customers have the right technologies for safe, smooth and efficient flights.”
Using the Digital MAP (DMAP) and the Enhanced Cursor Control Device (ECCD), the pilots will have the possibility to easily modify the approach.
The DMAP brings an essential safety element as the flight plan map can be merged with additional environmental factors, including weather radar and wind data, platform locations. It also includes the Automatic Information System (AIS) that alerts the pilot if a ship is about to interfere with its planned trajectory and allowing the pilot to plan a hold to the approach or a rerouting if necessary.
The ECCD, which will also be available on the H175 and the H160, is a new, ergonomic, easy-to-use control device which allows for a quick and efficient way to fine-tune the flight plan.
The H225’s upgraded avionics also includes the introduction of Required Navigation Performance approaches (Localizer Performance with Vertical Guidance (LPV) and Lateral & Vertical Navigation (LNAV/VNAV).
(Image provided with Airbus Helicopters news release)
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]