AD: Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Dec 17, 2020

AD: Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics)

AD 2020-25-02 Requires Replacing Certain NLG Door Attachment Bolts With Serviceable Bolts

The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes.

This AD was prompted by reports that certain nose landing gear (NLG) door attachment bolts are susceptible to hydrogen embrittlement. This AD requires replacing certain NLG door attachment bolts with serviceable bolts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective January 21, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0149, dated July 7, 2020 (EASA AD 2020-0149) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes. The NPRM published in the Federal Register on September 15, 2020 (85 FR 57168). The NPRM was prompted by reports that certain NLG door attachment bolts are susceptible to hydrogen embrittlement. The NPRM proposed to require replacing certain NLG door attachment bolts with serviceable bolts, as specified in an EASA AD.

The FAA is issuing this AD to address NLG door attachment bolts that were incorrectly manufactured and are susceptible to hydrogen embrittlement, decreasing the mechanical characteristics. This condition could lead to failure of the affected parts, which would impair the link between the NLG and NLG door and could prevent the extension or retraction of the NLG, and cause consequent damage to the airplane and possible loss of control during landing. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC