AD: Rolls Royce | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Thu, May 19, 2005

AD: Rolls Royce

AD NUMBER: 2005-10-13
MANUFACTURER: Rolls Royce
SUBJECT: Airworthiness Directive 2005-10-13
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Corporation (RRC) (formerly Allison Engine Company) 250-B17B, -B17C, -B17D, -B17E, -C20, -C20B, -C20F, -C20J, -C20S, and -C20W turboprop and turboshaft engines that do not have turbine energy absorbing ring, RRC part number (P/N) 23035175, or an equivalent FAA-approved serviceable turbine energy-absorbing ring, installed.

This AD requires installation of a turbine energy-absorbing ring in the plane of the 1st stage turbine wheel. This AD results from an unacceptable rate of uncontained 1st stage turbine wheel failures. We are issuing this AD to minimize the risk of uncontained 1st stage turbine wheel fragments from causing damage to the aircraft or damage to the second engine on twin-engine installations, which could lead to loss of control and loss of the aircraft.

FMI: www.airweb.faa.gov/ad

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC