Fri, Feb 17, 2006
Airbus Expects "No Impact" On Cert, Deliveries
Is a 3.3 percent margin of error good enough? That is the
question being asked after Airbus officials revealed Thursday an
A380 wing failed during stress testing earlier this week.
Those questions aren't being asked -- at least publicly -- by
those in Toulouse, however. Airbus maintains despite the unexpected
structural failure, the company anticipates no delay in plans to
bring the whalejet to market.
"It should have no impact on the certification and delivery,"
Airbus spokeswoman Barbara Kracht told the Associated Press,
although she acknowledged the wing design may need "refinements at
certain points" as a result of the failure.
One of those points will be the wing section between the two
engine pylons, where the fracture occurred Tuesday during ground
tests. At the time, the wing's tip was bent upward by over 24 feet
at the tip, the result of having a load equivalent to 1.45 times
the wing's rated limit load placed upon it. That is 3.3 percent
short of the targeted load Airbus had anticipated.
New aircraft are required to resist loads of 1.5 times the
limit, Kracht said.
Pending inquiries into the incident from the European Aviation
Safety Agency (EASA) and the FAA, Airbus engineers will determine
if modifications are required to the aircraft's 262-foot wing.
"We will need to find out from the data what is really needed,"
Kracht added, "but it's certainly not a redesign of the wing."
Such a redesign would be potentially disastrous to the A380
program, which has already been hit by production and
delivery delays stemming from a production-line shutdown last
year.
As it stands, the A380 is scheduled to enter service with
Singapore Airlines by the end of 2006.
More News
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]
Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]