AD: Cessna | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Wed, Jun 16, 2004

AD: Cessna

AD NUMBER: 2004-09-05
MANUFACTURER:
Cessna
SUBJECT: Airworthiness Directive 2004-09-05
SUMMARY: This amendment adopts a new airworthiness directive (AD); applicable to certain Cessna Model 500, 501, 550, and 551 airplanes; that requires a one-time inspection of the brake stator disks to determine to what change level they have been modified (if any), and related investigative and corrective actions if necessary. This AD also requires that the existing markings on the piston housing of certain brake assemblies be eliminated. The actions specified by this AD are intended to prevent wheel lockups that may be caused by cracked or broken brake stator disks becoming jammed in the brake assembly and preventing rotation. Such jamming of the brake assembly may result in reduced directional control or braking performance during landing. This action is intended to address the identified unsafe condition.This amendment adopts a new airworthiness directive (AD); applicable to certain Cessna Model500, 501, 550, and 551 airplanes; that requires a one-time inspection of the brake stator disks to determine to what change level they have been modified (if any), and related investigative and corrective actions if necessary. This AD also requires that the existing markings on the piston housing of certain brake assemblies be eliminated. The actions specified by this AD are intended to prevent wheel lockups that may be caused by cracked or broken brake stator disks becoming jammed in the brake assembly and preventing rotation. Such jamming of the brake assembly may result in reduced directional control or braking performance during landing. This action is intended to address the identified unsafe condition.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20040905

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC