First Completed Bearhawk Model 5 Takes Flight | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Nov 12, 2022

First Completed Bearhawk Model 5 Takes Flight

6-Seat, High-Performance Bushplane Takes to the Skies with Experienced Bearhawk Pilot

Bearhawk Aircraft has announced the first flight of a full, kit-built Model 5, opening a new era for the company's newest hot rod.

Rollie Van Dorn completed the first 25 hours in the completed Bearhawk 5, comparing it to previous entries in the company lineup like the smaller, 2-seat Patrol. The 6-seater is reportedly a total sweetheart, he said. “When maneuvering, the larger Model 5 feels the same as the Patrol. Ailerons actually feel lighter. I expected this build to perform exactly the same as the prototype, and it did without exception.”

In his first evaluation, Van Dorn flew for 8.7 hours, racking up more than 20 landings in getting a feel for the brand new plane. Notes from his flight report an indicated 142 knots cruise at 8,500 feet with the throttle at 24-square. Altitude was easily maintained with reduced power, with fuel consumption ranging between 11.0–15.7 gallons per hour. In pitching up he reports the aircraft exhibited gentle manners, as well as when maneuvering in steep turns.

“The Model 5 lands nicely and goes really fast," he said. “I was able to skywrite and view Bearhawk on my G3X and ADS-B displays. This made the time go by faster but also heightened my appreciation for the Model 5’s agile flying qualities." 

The backcountry brawler is a 6-spot design perfect for unimproved runways and short field performance with more than enough pep to climb back out. The kit in its completed form uses a 300 hp IO-540 and 82" 3-blade Hartzell prop, granting it a power-to-weight in the neighborhood of even competition aerobatic aircraft. The fuselage is welded 4130 tubing, fabric covered with 0.025/0.032 on a Riblet airfoil common to all Bearhawk designs.

FMI: www.bearhawkaircraft.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC