Cessna 208 Caravan PWC PT6A 114 Series Engines Oil Transfer
Fitting (elbow) Failures
AWB 72-004 Issue : 1
Date : 8 February 2010
Effectivity
All Cessna 208 Caravans powered by Pratt & Whitney Canada
(PWC) PT6A 114 Series engines.
Purpose
Advise operators and maintainers to consider undertaking specific
maintenance actions with regard to Engine Mount Bracket Assy
Attach. P/N 9910333-1 (vibration isolator) and P/N 310365501 oil
transfer fitting or “elbow”.
Background
A preliminary investigation by CASA and the ATSB into the recent
spate of PT6A in-flight engine shut-downs, indicates a possible
link between the incorrect installation of an Engine Mount Bracket
Assy Attach. P/N 9910333-1 (vibration isolator) and fatigue
cracking of the P/N 310365501 oil transfer fitting or
“elbow”.
Fatigue failure of the oil transfer fitting may allow engine oil
to be pumped overboard.
As far as can be determined at this point of the investigation,
the evidence suggests that there is a possibility that the fatigue
failure of this fitting may be caused by unusual vibration caused
by the incorrect installation of the upper vibration isolator, for
example, the aft portion installed inverted or up-side down.
Recommendation
As a precautionary measure, it is recommended that all operators
of the affected engines installed in Cessna 208 aircraft accomplish
the following before further flight:
All instances of incorrectly installed
vibration isolators and/or cracked elbows should be reported to
CASA via the SDR system to assist the on-going investigation.
Inspect all Engine Mount Bracket Assy Attach. P/N 9910333-1
vibration isolators to ensure correct installation and serviceable
in accordance with approved data.
Perform a close inspection on all P/N 310365501 elbows for any
signs of cracking.
Immediately remove from service any elbow with cracking
indications or that has been in service on an engine with an
incorrectly installed engine mount / vibration isolator.
Enquiries
Enquiries with regard to the content of this Airworthiness
Bulletin should be made via the direct link e-mail address: AirworthinessBulletin@casa.gov.au
Or in writing, to:
Airworthiness Engineering Branch
Civil Aviation Safety Authority
GPO Box 2005, Canberra, ACT, 2601
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]
AWB 72-004 Issue : 1
ANN's Daily Aero-Linx (05.02.24)
See All