AD: Honeywell International Inc. Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-NextGen-05.21.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Sun, Sep 20, 2020

AD: Honeywell International Inc. Turbofan Engines

AD 2020-18-09 Prompted By A Report Of An Engine Experiencing An Uncontained Release Of LPT Blades

The FAA is adopting a new airworthiness directive (AD) for all Honeywell International Inc. (Honeywell) ALF502L, ALF502L-2, ALF502L-2A, ALF502L-2C, ALF502L-3, ALF502R-3, ALF502R-3A, ALF502R-4, ALF502R-5, ALF502R-6, LF507-1F, and LF507-1H model turbofan engines.

This AD was prompted by a report of an engine experiencing an uncontained release of low-pressure turbine (LPT) blades. This AD requires initial and repetitive visual inspections of the overspeed fuel solenoid valve assembly and the fuel filter outlet. Depending on the results of these inspections, the AD may require inspection of the adjacent fuel system tube assemblies as well as replacement or overhaul of the overspeed fuel solenoid valve assembly. This AD also requires periodic overhaul of the overspeed fuel solenoid valve assembly. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 21, 2020.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Honeywell ALF502L, ALF502L-2, ALF502L-2A, ALF502L-2C, ALF502L-3, ALF502R-3, ALF502R-3A, ALF502R-4, ALF502R-5, ALF502R-6, LF507-1F, and LF507-1H model turbofan engines. The NPRM published in the  Federal Register on May 4, 2020 (85 FR 26375). The NPRM was prompted by a report of an engine experiencing an uncontained release of LPT blades. The NPRM proposed to require initial and repetitive visual inspections of the overspeed fuel solenoid valve assembly and the fuel filter outlet. Depending on the results of these inspections, the NPRM proposed to require inspection of the adjacent fuel system tube assemblies as well as replacement or overhaul of the overspeed fuel solenoid valve assembly. The NPRM also proposed to require periodic overhaul of the overspeed fuel solenoid valve assembly. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.19.24): Back-Taxi

Back-Taxi A term used by air traffic controllers to taxi an aircraft on the runway opposite to the traffic flow. The aircraft may be instructed to back-taxi to the beginning of the>[...]

Aero-News: Quote of the Day (05.19.24)

“Our WAI members across the nation are grateful for the service and sacrifice of the formidable group of WASP who served so honorably during World War II. This group of brave>[...]

Aero-News: Quote of the Day (05.20.24)

“Many aspiring pilots fall short of their goal due to the cost of flight training, so EAA working with the Ray Foundation helps relieve some of the financial pressure and mak>[...]

ANN's Daily Aero-Term (05.20.24): Blind Speed

Blind Speed The rate of departure or closing of a target relative to the radar antenna at which cancellation of the primary radar target by moving target indicator (MTI) circuits i>[...]

ANN's Daily Aero-Linx (05.20.24)

Aero Linx: International Airline Medical Association (IAMA) The International Airline Medical Association, formerly known as the Airline Medical Directors Association (AMDA) was fo>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC