Watch Out! NTSB Updates Report On Runway Incursion At Logan | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Tue, Jun 23, 2009

Watch Out! NTSB Updates Report On Runway Incursion At Logan

Construction Crew Crossed Active Runway

The NTSB has released a preliminary report for a runway incursion incident, in which a construction vehicle crossed an active runway at Boston's Logan International Airport as a USAirways Airbus A320 was on its takeoff roll.

According to the NTSB report:

On Thursday, June 18, 2009 at about 0636 eastern daylight time, a runway incursion occurred at the General Edward Lawrence Logan International Airport (BOS), Boston, Massachusetts involving a USAirways Airbus and a construction vehicle. The construction crew crossed runway 15R at taxiway M without approval as the Airbus was on departure roll.

According to the Federal Aviation Administration (FAA), the operator of a Ford Explorer, was not in radio communication with BOS tower air traffic controllers and had not been cleared to cross runway 15R. The Airbus rotated approximately 500 feet from the intersection of runway 15R and taxiway M as the vehicle cleared the runway edge southbound on taxiway M. The FAA stated that it appeared the tower controller was aware of the vehicle operating on taxiway M but not its intension to cross. The ground radar alerted the controllers of the event.

Taxiway M is currently under construction and runway 15R is occasionally closed due to the construction. The Airport Authority designates the runway closure with signage which was not in place during this event indicating that the runway was an active runway. The Airport Authority also indicated that all personnel were briefed that the runway was active. The driver of the
vehicle indicated that he had not been briefed to that fact. The driver has been suspended from driving on the airport pending an investigation.

The Airport Authority has ceased all construction upon completion of an investigation into the incident. USAirways flight 27, an Airbus A320, was departing Boston for Phoenix, Arizona with 84 passengers and five. There were no injuries to the crew and passengers nor damage to the airplane. The incident occurred during daylight visual meteorological conditions.

FMI: www.ntsb.gov 

Advertisement

More News

ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)

DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]

ANN's Daily Aero-Linx (04.26.24)

Aero Linx: The International Association of Missionary Aviation (IAMA) The International Association of Missionary Aviation (IAMA) is comprised of Mission organizations, flight sch>[...]

Airborne 04.22.24: Rotor X Worsens, Airport Fees 4 FNB?, USMC Drone Pilot

Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]

Airborne 04.24.24: INTEGRAL E, Elixir USA, M700 RVSM

Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]

Airborne-NextGen 04.23.24: UAVOS UVH 170, magni650 Engine, World eVTOL Directory

Also: Moya Delivery Drone, USMC Drone Pilot, Inversion RAY Reentry Vehicle, RapidFlight UAVOS has recently achieved a significant milestone in public safety and emergency services >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC