NTSB Chair Hersman Testifies On Aircraft Icing | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Thu, Feb 25, 2010

NTSB Chair Hersman Testifies On Aircraft Icing

Chides FAA For Not Completely Addressing The Issue

NTSB Chairman Deborah A.P. Hersman (pictured, right), in testimony Wednesday before the House Aviation Subcommittee, Committee on Transportation and Infrastructure, discussed the dangers of aircraft flying in icing conditions and highlighted longstanding Safety Board recommendations that have yet to be adopted by the FAA to address the issue. 

Reducing the dangers of flying in icing conditions has been on the NTSB's Most Wanted List of Transportation Safety Improvements since 1997.  Last week, the NTSB voted to keep the issue area, along with its four open recommendations to the FAA, on the 2010 Most Wanted List with a "red" classification.  The red classification indicates an unacceptable response by the FAA.  

"Although the NTSB relies on others to implement these recommendations, we have worked to educate the pilot community about some of the hazards associated with icing conditions through our Safety Alerts," Hersman said.
 
In 1981, the NTSB published a report titled "Aircraft Icing Avoidance and Protection" and recommended the FAA review icing certification criteria. The special study followed a series of icing-related accidents where aircraft operating in icing conditions and the varying consequences that ice accretion had on different types of aircraft raised concern.

In the 1990s the NTSB re-examined the issue of airframe structural icing and concluded that the icing certification process continues to be inadequate.  The Board also became concerned about airplanes that fly in supercooled large droplet conditions and that used pneumatic boots to deice
the aircraft in flight.  In the last decade, the Board has investigated more than 50 accidents involving aircraft icing, resulting in over 200 fatalities and it continues to investigate accidents where icing is a factor. 

In the last few years, the FAA has addressed some of the recommendations related to icing by issuing a number of final and proposed regulations.  however, not all of the NTSB's recommendations on icing have been addressed.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)

DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]

ANN's Daily Aero-Linx (04.26.24)

Aero Linx: The International Association of Missionary Aviation (IAMA) The International Association of Missionary Aviation (IAMA) is comprised of Mission organizations, flight sch>[...]

Airborne 04.22.24: Rotor X Worsens, Airport Fees 4 FNB?, USMC Drone Pilot

Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]

Airborne 04.24.24: INTEGRAL E, Elixir USA, M700 RVSM

Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]

Airborne-NextGen 04.23.24: UAVOS UVH 170, magni650 Engine, World eVTOL Directory

Also: Moya Delivery Drone, USMC Drone Pilot, Inversion RAY Reentry Vehicle, RapidFlight UAVOS has recently achieved a significant milestone in public safety and emergency services >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC