Sun, Jun 20, 2021
AD 2021-12-02 Prompted By A Report That A Number Of Nacelle A-Frames Were Not Manufactured In Accordance With Engineering Drawings
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes.
This AD was prompted by a report that a number of nacelle A-frames were not manufactured in accordance with engineering drawings. This AD requires, depending on airplane configuration, removing the fasteners on the nacelle A-frame side brace sub-assemblies, doing an eddy current inspection for cracking, cold-working the holes, installing oversize fasteners, re-identifying the reworked side brace fitting and A-frame, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 20, 2021.
Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued TCCA AD CF-2020-39, dated October 14, 2020 (TCCA AD CF-2020-39) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. You may examine the MCAI in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0183.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. The NPRM published in the Federal Register on March 22, 2021 (86 FR 15149). The NPRM was prompted by a report that a number of nacelle A-frames were not manufactured in accordance with engineering drawings. The holes in the side brace sub-assemblies were not cold-worked as required. As a result the side brace fitting might not meet its fatigue life, and cracking of the A-frame bottom flange may result. The NPRM proposed to require, depending on airplane configuration, removing the fasteners on the nacelle A-frame side brace sub-assemblies, doing an eddy current inspection for cracking, cold-working the holes, installing oversize fasteners, re-identifying the reworked side brace fitting and A-frame, and repair if necessary. The FAA is issuing this AD to address possible cracking of the A-frame. This condition,
if not addressed, may lead to collapse of the main landing gear (MLG). See the MCAI for additional background information.
More News
Runway Centerline Lighting Flush centerline lights spaced at 50-foot intervals beginning 75 feet from the landing threshold and extending to within 75 feet of the opposite end of t>[...]
Aero Linx: Air Force Global Strike Command Air Force Global Strike Command, activated August 7, 2009, is a major command with headquarters at Barksdale Air Force Base, Louisiana, i>[...]
Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]
Also: USCG Retires MH-65 Dolphins, Irish Aviation Authority, NATCA Warns FAA, Diamond DA42 AD This summer, history enthusiasts will have a unique opportunity to experience World Wa>[...]
Also: Moya Delivery Drone, USMC Drone Pilot, Inversion RAY Reentry Vehicle, RapidFlight UAVOS has recently achieved a significant milestone in public safety and emergency services >[...]