AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Tue, Sep 07, 2021

AD: Airbus SAS Airplanes

AD 2021-17-04 Requires A One-Time Inspection Of The Area Around The Latch Hook Mounting Holes Of The Forward And Aft Door Frames

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A321-211, -231, and -232 airplanes.

This AD was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. This AD requires a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 5, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0222, dated October 14, 2020 (EASA AD 2020-0222) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus SAS Model A321-211, -231, and -232 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A321-211, -231, and -232 airplanes. The NPRM published in the Federal Register on March 8, 2021 (86 FR 13229). The NPRM was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. The NPRM proposed to require a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in EASA AD 2020-0222.

The FAA is issuing this AD to address damage from false drill starts, which could result in reduced structural integrity of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC