Second SAS Q400 Experiences Landing Gear Problems | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Wed, Sep 12, 2007

Second SAS Q400 Experiences Landing Gear Problems

Bombardier Grounds Higher-Time Planes Until Inspections

One accident may be an anomaly... but two accidents in a matter of days, involving the same carrier, aircraft-type AND, apparently, the same problem, may mean something more. In the wake of a second landing gear-related incident in three days involving a Bombardier Q400 operated by Scandanavian Airlines, the Canadian planemaker recommended the grounding of approximately 60 planes until safety inspections are carried out.

The second incident occurred Wednesday, and involved a SAS Q400 landing at Vilnius, Lithuania. Flight SK2748 bound to Palanga was diverted when the crew experienced 'technical difficulties,' according to the airline.

Just as with an incident three days before involving another of the carrier's turboprops -- this one landing at Aalborg, Denmark -- the aircraft's right main landing gear collapsed on landing, according to Swedish media sources.

As ANN reported, five persons onboard the plane in Denmark were injured while evacuating the plane after it veered off the runway, and parts of the right propeller separated from the hub and impacted the fuselage. There were no reported injuries among the 52 passengers and crew onboard Wednesday's flight, according to SAS.

Immediately after Wednesday's accident, Bombardier and Goodrich, the landing gear manufacturer, issued an All Operator Message (AOM) that operators of Q400 aircraft having accumulated more than 10,000 landing gear cycles be grounded until an inspection of the landing gear is carried out. The AOM affects about 60 of the over 160 Q400s in service.

Bombardier also reports Transport Canada (TC) has been briefed on both events and the planemaker is working with TC to establish the requirement for further corrective actions, if required.

"A Bombardier Air Safety representative has been dispatched to the second incident site to provide assistance to the investigating authorities," the manufacturer said. "Until such time as investigations are concluded by the relevant aviation authorities, Bombardier cannot speculate or comment as to the cause of these incidents."

The Bombardier Q400 is an updated variant of the DeHavilland Canada DHC-8 ("Dash 8") twin-turboprop regional airliner. The original Dash 8 -- itself a reeenginered offspring of the four-engine DHC-7 -- entered service in 1983; the "Q" series (for "quiet," as the aircraft now featured active noise suppression measures) entered service in 1996.

Somewhat unusual for a passenger aircraft -- thought not unique -- the DHC-8 and Q400 sport rearward-retracting (i.e., with the direction of travel) maingear.

FMI: www.q400.com, www.flysas.com, www.goodrich.com

Advertisement

More News

Unfortunate... ANN/SportPlane Resource Guide Adds To Cautionary Advisories

The Industry Continues to be Rocked By Some Questionable Operations Recent investigations and a great deal of data has resulted in ANN’s SportPlane Resource Guide’s rep>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

ANN's Daily Aero-Term (04.29.24): Visual Approach Slope Indicator (VASI)

Visual Approach Slope Indicator (VASI) An airport lighting facility providing vertical visual approach slope guidance to aircraft during approach to landing by radiating a directio>[...]

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC