Flight Design Takes Its LSA Lead Seriously | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Wed, Apr 18, 2007

Flight Design Takes Its LSA Lead Seriously

Company Notes 153 US Registrations

Big news at Sun 'N Fun this week continues to come from the light sport aircraft marketplace. While the category has yet to celebrate its third anniversary in the US,  several LSA manufacturers are taking positive steps towards establishing LSA's place in the future of general aviation.

Leading the charge is Flight Design USA, which also leads the category with a commanding 21% of the market, according to 153 US registrations through early April 2007. The company is trailed by American Legend at 13% (93 aircraft) and Evektor at 8% (54 aircraft) of all FAA registrations.

By way of comparison, a total of 49 models built by 38 companies have received their SLSA Airworthiness Certificate since the LSA Rule went into affect in July of 2004.

Flight Design reports more than 900 of its high-wing CT have been delivered worldwide since its introduction in 1997, with over 150 CTs registered as special light-sport aircraft in the USA.

The CT is a two-place, side-by-side airplane made of 98% carbon fiber, with a useful load of over 670 pounds. The powerplant is powered a 100-hp Rotax 912S engine and includes as standard equipment a BRS ballistic parachute.

Flight Design President Tom Peghiny tells ANN his company plans to retain its best-selling title. Company officials on both sides of the Atlantic have spent considerable time developing production capability, as well as building a distribution and service network in the US.

In addition, a standardized maintenance training program will be available to promote consistent technical programs on the Rotax engine and composite repair. The company will initially offer the course for Flight Design technicians in Berlin, but as the program develops plans are underway to bring the program over to the States.

FMI: www.flightdesignusa.com

Advertisement

More News

ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)

DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]

ANN's Daily Aero-Linx (04.26.24)

Aero Linx: The International Association of Missionary Aviation (IAMA) The International Association of Missionary Aviation (IAMA) is comprised of Mission organizations, flight sch>[...]

Airborne 04.22.24: Rotor X Worsens, Airport Fees 4 FNB?, USMC Drone Pilot

Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]

Airborne 04.24.24: INTEGRAL E, Elixir USA, M700 RVSM

Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]

Airborne-NextGen 04.23.24: UAVOS UVH 170, magni650 Engine, World eVTOL Directory

Also: Moya Delivery Drone, USMC Drone Pilot, Inversion RAY Reentry Vehicle, RapidFlight UAVOS has recently achieved a significant milestone in public safety and emergency services >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC