Thu, Jun 11, 2020
Witness: The Tail Rotor Separated From The Helicopter
Location: Mesa, AZ Accident Number: WPR20LA130
Date & Time: 04/24/2020, 1600 MST Registration: N3276T
Aircraft: Bell UH 1H Injuries: 1 Fatal, 1 Serious
Flight Conducted Under: Part 91: General Aviation - Positioning
On April 24, 2020, about 1600 mountain standard time, a Bell UH-1H helicopter, N3276T, was substantially damaged when it was involved in an accident in Mesa, Arizona. The pilot was fatally injured, and the passenger was seriously injured. The helicopter was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 relocation flight.
Witnesses reported they observed the helicopter flying low towards Falcon Field Airport (FFZ), Mesa, Arizona, with white smoke coming from the rear rotor area. Suddenly, the tail rotor separated from the helicopter and landed in a dirt lot below. The helicopter continued northeast as it started to spin and impact the ground.
On scene examination by a Federal Aviation Administration Inspector indicated that the debris field was about 1/2 mile, extending along a generally northeast direction. The first identified piece of debris were fragments of glass, which were consistent with a navigation light on the vertical stabilizer. About 200 yards further northeast was the tail rotor assembly, and the input pinion gear assembly. The rest of the helicopter came to rest about ½ mile further northeast in an open, slightly sloped field. The first pieces of debris in the field were the vertical stabilizer and a portion of the horizontal stabilizer followed by two long and narrow ground strikes consistent with main rotor blade strikes. Immediately following this area was the main wreckage; the helicopter came to rest slightly nose, and left side low, along a heading of about 49 degrees. The helicopter exhibited upward crushing throughout the cabin and fuselage, most extensively on the left side of the fuselage. The mast and the
main transmission were displaced forward, and the main rotor assembly was fracture separated. The main rotor blade assembly was the last major piece of debris located about 20 yards northeast of the main wreckage.
The helicopter has been recovered to a secure location for further examination.
More News
Instrument Runway A runway equipped with electronic and visual navigation aids for which a precision or nonprecision approach procedure having straight-in landing minimums has been>[...]
Aero Linx: Alaska Airmen's Association The Alaska Airmen's Association includes over 2,000 members—we are one of the largest General Aviation communities in the country. We s>[...]
Also: Flt School Security, G600 Steep-Approach, Honduran Aid, PW545D Cert Two aircraft performing at the Fort Lauderdale Air Show clipped wings during a routine last Sunday, spooki>[...]
Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]
Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]