Fri, Feb 17, 2017
Says Hardened Deck Doors Are Only A Partial Solution To Cockpit Security
The downing of four commercial airplanes and loss of nearly 3,000 lives on 9/11 was due, in part, to inadequate protection of the aircraft flight deck. Shortly after 9/11, Congress and the FAA required the installation of hardened flight deck doors on most commercial airline aircraft as one of many new layers of security. The hardened flight deck doors are an important improvement to security, but they are not a complete solution to preventing unauthorized individuals from entering the flight deck. The flight deck door must be opened during flight to provide for pilots’ biological needs and for operational requirements related to safety.
As events have demonstrated, Americans still remain vulnerable to terrorist attacks. There have been at least 52 hijacking attempts around the world since 9/11. The U.S. government has repeatedly and recently confirmed that aviation, in particular, is still a target of radical terrorists and the threat of hijackings is real.
Since 2003, two major airlines have voluntarily installed a lightweight, inexpensive wire mesh, called a flight deck secondary barrier, on hundreds of their aircraft, which is permanently mounted between the flight deck door and the cabin. Boeing and Airbus offer the secondary barrier as equipment on new aircraft. Installation of retrofitted secondary barriers on aircraft already in the fleet represents a minimal cost, as they can be added at a cost of approximately $5,000 per aircraft or even less.
During the 114th Congress, legislation was introduced in both the House and Senate (i.e., H.R. 911 and S. 911) to address this issue by mandating secondary barriers for all commercial passenger operations. A version of these bills, which mandated secondary barriers on all new aircraft, was included in both the FAA reauthorization bill that passed the full Senate and the House counterpart that passed out of committee. (Note: The House never voted on a full FAA reauthorization on the floor during the 114th Congress.)
(Source: ALPA news release)
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]