Mon, Oct 30, 2017
GE Makes $600M Investment For GE9X Production Efforts
What does it take to build the world's largest jet engine? For GE Aviation's GE9X engine that will power Boeing's 777X aircraft, it will take more than 20 sites and an investment of more than $600 million in plant, equipment and tooling.
"The supply chain for the GE9X engine has a wide global footprint, stretching from our facilities in Canada, Italy, Poland and the US to our international participants located in Belgium, France, Germany and Japan," said Ted Ingling, general manager of the GE9X engine program at GE Aviation. "Several sites, such as Peebles, Durham, Batesville and Avio Aero's Pomigliano, had to make significant changes to accommodate the engine's large size."
The GE Aviation facilities in the GE9X supply chain are:
- Evendale, Ohio: Program management, development assembly and lean labs
- Asheville, North Carolina: Ceramic Matrix Composite (CMC) Nozzles
- Auburn, Alabama: Additive fuel nozzles
- Batesville, Mississippi: Composite fan stator program
- Bromont, Canada: Compressor airfoils
- Dayton, Ohio: Turbine blades, ducts and tubes
- Durham, North Carolina: Propulsor assembly
- Greenville, South Carolina: Turbine blades
- Jacksonville, Florida (Unison): Turbine ignitions components, sensors and harnesses
- Lynn, Massachusetts: Seals
- Middle River, Maryland: Thrust reversers
- Muskegon, Michigan: Shrouds
- Newark, Delaware: CMC shrouds, nozzles and combustor liners
- Norwich, NY (Unison): Sensors
- Peebles, Ohio: Final assembly and development and production testing
- Rutland, Vermont: Compressor airfoils
- San Marcos, TX (CFAN): Composite fan blades
- Terre Haute, Indiana: Combustor assembly
- Victorville, California: Flight testing
- Wilmington, North Carolina: Rotating parts
- Winnipeg, Canada: Icing tests
Avio Aero facilities:
- Pomigliano D'Arco (Naples), Italy: Low pressure turbine assembly
- Cameri (Novara), Italy: Low pressure turbine blades
- Bielsko-Biala, Poland: Low pressure turbine vanes
- Brindisi, Italy: low pressure turbine case
- Rivalta Di Torino, Italy: Gearboxes
- Borgaretto di Beinasco (Turin), Italy: Gearboxes
The GE9X supply chain also includes international participants: IHI Corporation of Japan, Safran Aircraft Engines of France, Safran Aero Boosters of Belgium and MTU Aero Engines AG of Germany.
The 100,000-pound thrust class GE9X engine continues certification testing with flight testing on GE's flying testbed scheduled for later this year. The engine will have the largest front fan at 134 inches in diameter with a composite fan case and 16 fourth-generation carbon fiber composite fan blades. Other key features include; a next-generation 27:1 pressure-ratio 11-stage high-pressure compressor; a third-generation TAPS III combustor for high efficiency and low emissions; CMC material in the combustor and turbine and the most efficient low-pressure turbine GE has ever built.
Almost 700 GE9X engines are on order.
(Source: GE Aviation news release. Image from file)
More News
DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]
Aero Linx: The International Association of Missionary Aviation (IAMA) The International Association of Missionary Aviation (IAMA) is comprised of Mission organizations, flight sch>[...]
Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]
Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]
Also: Moya Delivery Drone, USMC Drone Pilot, Inversion RAY Reentry Vehicle, RapidFlight UAVOS has recently achieved a significant milestone in public safety and emergency services >[...]