Wed, Oct 11, 2006
Applicability:
- Model SR20 aircraft, serial numbers 1005 through 1600.
- Model SR22 aircraft, serial numbers 0002 through 1727.
Requirement:
- For Model SR20 aircraft, serial numbers 1005 through 1600, and
Model SR22 aircraft, serial numbers 0002 through 1727: Accomplish
the requirements of Cirrus Design Corporation Alert Service
Bulletin SB 2X-25-17, Revised 20 January 2006.
- For Model SR20 aircraft, serial numbers 1005 through 1455, and
Model SR22 aircraft, serial numbers 0002 through 1044: Accomplish
the requirements of Cirrus Design Corporation Alert Service
Bulletin SB 2X-25-06 R4, Revised 5 May 2005.
Note 1: FAA AD 2006-19-10 Amdt 39-14767 refers.
Note 2: Requirement 2 remains unchanged from the original issue
of this Airworthiness Directive and need not be reapplied if
previously accomplished.
Compliance:
Requirement 1: Within 50 hours time in service or 180 days after
23 November 2006, whichever occurs first; unless already
accomplished.
Requirement 2: Within 50 hours time in service or 180 days after
13 October 2005, whichever occurs first; unless already
accomplished.
Note: The compliance date for Requirement 2
of this Airworthiness Directive remains unchanged by this
amendment. This Amendment becomes effective on 24 October
2006.
Background:
The FAA received information from the manufacturer that the crew
seats, under emergency landing dynamic loads, may fold forward at
less than the 26g required by the regulations. The actions required
by this Directive are intended to prevent the crew seats from
folding forward during emergency landing dynamic loads with
consequent occupant injury.
This amendment has been raised because the manufacturer has
developed new crew seat break-over pins to replace the old crew
seat break-over bolts. Consequently, this AD retains the action
from the original issue of replacing the crew seat recline locks on
both seats and adds the action of replacing the crew seat
break-over bolts with the new crew seat break-over pins on both
seats.
This amendment was raised to apply FAA AD 2006-19-10 which
superseded AD 2005-17-19.
More News
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]