FAA Reinstates Data For Proline 4 And Proline 21 Databases | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Jan 05, 2018

FAA Reinstates Data For Proline 4 And Proline 21 Databases

Some 10,000 Approach Procedures Again Approved For Navigation

The FAA has reinstated approximately 10,000 approach procedures in the database for the Rockwell Collins Flight Management Systems (FMS) Pro Line 4 and Pro Line 21 devices. The Safety Alert For Operators (SAFO) also provides awareness to flightcrews of the new Rockwell Collins Temperature Compensation Limitations.

The approach procedures were reinstated in the 12/14/2017 navigation database update.

According to the SAFO, during flight inspection, an operator observed the FMS map displaying an incorrect turn for the CYXJ (Fort St John) ILS Runway 29 missed approach while using temperature compensation (aircraft CRJ-200 with Pro Line 4 FMS 4.2). The operator assumed this was only with the map display and reported this issue to Rockwell Collins. Rockwell Collins determined that if the crew manually edits or temperature-compensates a “Climb to” altitude, the FMS removes the database turn direction (if any) on the following leg if the leg is Course-to-Fix or Direct-to-Fix. After sequencing the “Climb to” leg, the FMS will turn in the wrong direction if the required turn direction is not the most direct. This can occur in departures and missed approaches.  

The FAA is working with Rockwell Collins to resolve this issue. Rockwell Collins has released an OPS Bulletin (Rockwell Collins OPSB 0166-17R4) to mitigate the issue. The condition occurs in FMS versions 3.3 through FMS 4.2. The affected part numbers are identified in the SAFO linked below. For assistance in finding the FMS version installed on your aircraft, see Rockwell Collins Service Information Letter (SIL) 523-0824752 (Flight Management System Version [FMS] Matrix).

The FAA recommends that operators should familiarize themselves with the information in this SAFO, as well as OPSB 0166-17R4, which provides guidance for flight crews to operate Rockwell Collins systems or products. Flight crews should be aware of the new Rockwell Collins-imposed limitations as well as the recommendations identified in OPSB 0166-17R4.

(Image from file)

FMI: SAFO

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC