AD: Rolls-Royce Deutschland Ltd & Co KG | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Jun 06, 2020

AD: Rolls-Royce Deutschland Ltd & Co KG

AD 2020-12-03 -- Manufacturer Found That A P30 (Air Pressure) Sense Line Could Become Partially Blocked

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Trent XWB-97 model turbofan engines.

This AD requires updating electronic engine control (EEC) software. This AD was prompted by the manufacturer's finding that a P30 (air pressure) sense line could become partially blocked with a mixture of ice and water, which would cause a time-lag in the P30 signal, interfering with the fuel flow limit calculations. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 18, 2020.

Supplementary Information: The European Union Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued EASA AD 2020-0035, dated February 26, 2020 (referred to after this as “the MCAI”), to address an unsafe condition for the specified products.

The MCAI states: During ground tests, it was found that a P30 (air pressure) sense line could become partially blocked with a mixture of ice and water, which would cause a time-lag in the P30 signal, interfering with the fuel flow limit calculations. This condition, if not corrected, could lead to loss of thrust control, possibly resulting in reduced control of the aeroplane. To address these potential unsafe conditions, Rolls-Royce defined a new EEC SW, XWB_97-7.0, P/N RRY23XWB0001024, which corrects these issues. For the reasons described above, this [EASA] AD requires updating the EEC SW. This [EASA] AD also prohibits installation of affected SW on any engine.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC