AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Mon, Apr 26, 2021

AD: The Boeing Company Airplanes

AD 2021-08-12 Prompted By Crack Indications Found In The Lower Aft Wing Skin Bolt Holes

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes.

This AD was prompted by crack indications found in the lower aft wing skin bolt holes where the flap tracks attach to the track support fitting. This AD requires repetitive inspections for cracking of the left and right wing, lower aft wing skin aft edge, at certain flap track locations, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective May 28, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. The NPRM published in the Federal Register on July 28, 2020 (85 FR 45355). The NPRM was prompted by crack indications found in the lower aft wing skin bolt holes where the flap tracks attach to the track support fitting.

The FAA issued a supplemental notice of proposed rulemaking (SNPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. The SNPRM published in the Federal Register on January 21, 2021 (86 FR 6276). The SNPRM was prompted by a determination that the compliance time should be reduced for airplanes on which Aviation Partners Boeing (APB) blended winglets have been installed using supplemental type certificate (STC) ST01219SE. The SNPRM proposed to require repetitive inspections for cracking of the left and right wing, lower aft wing skin aft edge, at certain flap track locations, and applicable on-condition actions. The FAA is issuing this AD to address undetected cracking in the lower wing skin, which could result in the inability of the structure to carry limit load, and adversely affect the structural integrity of the airplane.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC