Sun, Sep 14, 2014
Airbus Defense And Space Employing The Technique
The latest generation of satellites from Airbus Defense and Space contain special clamps that join the body of the satellite to the feed and sub-reflector assembly at the top end. Clamps manufactured by conventional production methods did not meet the expectations of the Spanish corporate division. The engineers thus chose the additive-metal-manufacturing technique from EOS for production. This process, where metal powder coats are fused by laser, also allowed an easy adaptation of the component's design.
The components now survive the set range of 330°C at a force effect of 20 kN permanently and with no problems. What's more, the Spanish aerospace experts could also reduce the production time for the holding clamps during assembly of the feed and sub-reflector unit by five days. Less than a month is now needed to assemble the three holding devices needed for each satellite. The costs savings during production are over 20%. Moreover, the engineers have successfully reduced the weight of the component.
Titanium could still be used as a proven material: it has emerged as a suitable material - as so often in the aerospace industry: apart from its advantages in terms of absolute weight and thermal diffusivity, it also offers an acceptable specific weight. The fixtures therefore hold the components to be mounted safely on the body and, on the other hand, attenuate the extreme variations in temperature in space: these range from -180 to +150°C, so that the strain on the material is correspondingly great.
"The solution has two advantages: firstly, we could optimize the production ourselves," said Otilia Castro Matías from Airbus Defense and Space. "In addition, we were able to improve the design so that the complete work piece can be manufactured in one operation."
(Image provided by Airbus)
More News
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]
Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]