NTSB: Glider MidAir (Thankfully) Results in Safe Landings | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sun, Jun 27, 2010

NTSB: Glider MidAir (Thankfully) Results in Safe Landings

Competition Accident Could Have Been A LOT Worse

See and avoid... especially when one knows that they're going to be in close proximity to other aircraft... like conditions found during a competition sailplane event. This Utah contest nearly claimed two pilots when they both partook of the same thermal...

NTSB Identification: WPR10LA294A
14 CFR Part 91: General Aviation
Accident occurred Tuesday, June 15, 2010 in Parowan, UT
Aircraft: SCHLEICHER ALEXANDER GMBH & CO ASH 26 E, registration: N455S
Injuries: 2 Uninjured.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On June 15, 2010, at 1533 mountain daylight time, a Schleicher Alexander GMBD ASH 26E glider, N455S, and a Schempp-Hirth Ventus 2CT glider, N514TW, were involved in a mid-air collision about 75 miles northeast of Parowan, Utah. Neither pilot was injured. Both pilots were the sole occupants of their respective gliders. The ASH 26E sustained substantial damage, but the Ventus 2CT was not damaged. Both pilots were operating under the provisions of 14 Code of Federal Regulations Part 91 in visual meteorological conditions. Both gliders departed Parowan, Utah about three hours prior to the collision, and Parowan was the planned final destination for both pilots. No flight plan had been filed.

According to both pilots, they were competing in a glider competition task that required them to depart a point near Parowan, fly to a point about 90 miles northeast of Parowan, and then to return to Parowan for landing. Both pilots where flying back to Parowan after reaching the turnaround point when they entered the same thermal and began to climb. During their first full 360 degree turn in the thermal, the left wing of the ASH 26E and the nose of the Ventus 2CT came in contact. The impact resulted in the separation of the outboard three feet of the wing of the ASH 26E, but the Ventus 2CT remained undamaged. The pilots of both gliders were able to return to Parowan, where they both completed uneventful landings.

FMI: www.ntsb.gov

Advertisement

More News

Airborne 05.10.24: Icon Auction, Drunk MedEvac Pilot, Bell ALFA

Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]

ANN's Daily Aero-Term (05.13.24): ILS PRM Approach

ILS PRM Approach An instrument landing system (ILS) approach conducted to parallel runways whose extended centerlines are separated by less than 4,300 feet and at least 3,000 feet >[...]

ANN's Daily Aero-Linx (05.13.24)

Aero Linx: FlyPups FlyPups transports dogs from desperate situations to fosters, no-kill shelters, and fur-ever homes. We deliver trained dogs to veterans for service and companion>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Airborne 05.08.24: Denali Update, Dad-Daughter Gyro, Lake SAIB

Also: NBAA on FAA Reauth, DJI AG Drones, HI Insurance Bill Defeated, SPSA Airtankers The Beechcraft Denali continues moving forward towards certification, having received its FAA T>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC