NASA Details Super Pressure Balloon Recovery Plans In Australia | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Mon, May 11, 2015

NASA Details Super Pressure Balloon Recovery Plans In Australia

Aircraft Landed April 27, Recovery Expected To Take Two Weeks

A NASA tracking and communications payload suspended beneath a super pressure balloon (SPB) landed safely upright via parachute in the Australian outback April 27 (April 28 in Australia) following the commanded flight termination of the balloon. 

Now, NASA is tackling the difficult task of recovering the 3,500-pound payload (which includes the parachute and gondola) and 5,000-pound balloon, a process that could run up to a week given the challenges of operating in the remote area in southwest Queensland.

"The outback can be a tough, unforgiving, unapologetic environment to operate in," said Debbie Fairbrother, NASA's Balloon Program Office Chief who has accompanied past balloon recovery operations in the outback. "You need to be self-sufficient, you need a lot of logistics, and you need to plan for many different scenarios."

Following the flight's conclusion, NASA contracted with a local aviator to fly over the landing site, confirming the payload and balloon touched down near their predicted landing areas given wind and environmental conditions at the time. The balloon landing site is approximately 18.4 miles from the payload landing site.

Since then, NASA, working through a local citizen familiar with the area, has been in contact with the landowner in coordinating the recovery operation. Most of the six-person recovery team have arrived in country and are initially staging out of Adelaide, South Australia, where they have rented camper vans and supplies in order to operate in the remote area.

"If you run out of supplies, break or forget a piece of equipment, it's not like you can run to the local hardware store and be up and running again in 10 minutes," said Fairbrother. "The upfront planning will help ensure the safety of our team in the field and a successful recovery."

To lift and transport the combined 8,500-pounds of payload and balloon material, which is similar in appearance and thickness to sandwich bag material, NASA has rented a crane truck and a flatbed truck. Part of the team is arriving in Brisbane, Australia, May 7 to collect the trucks and drive them to Adelaide, at which time the entire team will proceed to the recovery location.

After the balloon and payload are recovered, the team will return to Adelaide, where they will containerize and ship both back to the United States for analysis. "We will investigate the cause of the leak and apply any lessons learned to future super pressure balloon flights," said Fairbrother.

The SPB test flight, which began March 26 EDT (March 27 in New Zealand) from Wanaka Airport, New Zealand, was the first time the SPB has flown for a long duration through the day and night cycle. Most standard heavy-lift zero pressure balloons can vary in altitudes as great as 45,000 feet during the alternating warming during the day and cooling at night. The SPB, which is designed to maintain a positive internal pressure and shape irrespective of its external environment, maintained a float altitude of 110,000 feet with minimal altitude variation for more than 30 days of flight through the day and night cycle.

NASA ended the flight after discovering and verifying a leak in the balloon.

"We hoped for more flight time, but are very pleased with the balloon's performance in what was by far the most rigorous test of the technology to date," said Fairbrother.

FMI: http://sites.wff.nasa.gov/code820

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC