AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Mon, Aug 15, 2022

AD: The Boeing Company Airplanes

AD 2022-15-07 Requires Revising The Existing Airplane Flight Manual (AFM)

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400 series airplanes.

This AD was prompted by a report that after a certain circuit breaker tripped, power to the two pitot-static (P/S) probe heaters on the right-hand side was lost, and the flightcrew discovered conflicting procedures in the flightcrew operations manual/quick reference handbook (FCOM/QRH). This AD requires revising the existing airplane flight manual (AFM) to incorporate procedures to be applied during P/S probe heater failure conditions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective September 15, 2022. 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 747-400 series airplanes. The NPRM published in the Federal Register on December 28, 2021 (86 FR 73694). The NPRM was prompted by a report that after a certain circuit breaker tripped, power to the two P/S probe heaters on the righthand side was lost, and the flightcrew discovered conflicting procedures in the FCOM/QRH. In the NPRM, the FAA proposed to require revising the existing AFM to incorporate procedures to be applied during P/S probe heater failure conditions. The FAA is issuing this AD to address the conflicting procedures, which could result in the transmission of potentially inaccurate pitot static pressure data to the air data computer (ADC), resulting in erroneous or misleading air data being displayed, which, in combination with a stall, overspeed, overrun, or short/hard landing condition, could result in reduced ability of the flightcrew to maintain continued safe flight and landing of the airplane.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC