AD: Gulfstream Aerospace Corporation Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Jun 17, 2020

AD: Gulfstream Aerospace Corporation Airplanes

AD 2020-12-06 Prompted By Reports Of Uncommanded Nose Wheel Steering Turns

The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation (Gulfstream) Model G-IV airplanes. This AD was prompted by reports of uncommanded nose wheel steering turns.

This AD requires replacing the nose wheel steering servo valve manifold, incorporating revised operating procedures into the airplane flight manual (AFM), doing a records inspection for any incidents of un-commanded nose wheel steering turns, and reporting the results to the FAA. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 20, 2020.

SUPPLEMENTARY INFORMATION: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Gulfstream Model G-IV airplanes. The NPRM was published in the Federal Register on December 27, 2019 (84 FR 71333). The NPRM was prompted by reports of uncommanded nose wheel steering turns. An investigation revealed the supplier compromised the seals during assembly of the electro-hydraulic servo valves, which allows moisture to enter the valve.

During cold soak conditions, the moisture forms ice crystals in the servo valve armature air gaps, which may cause the valve armature to displace to a non-neutral position. This condition, if not addressed, could result in an un-commanded nose wheel position once power is applied to the nose wheel servo and subsequent lateral runway departure. To address this condition, the supplier improved their production quality control process to reduce the risk of compromised seals in the nose wheel steering servo valve. Gulfstream also revised the normal, abnormal, and emergency procedures in the AFMs related to nose wheel steering un-commanded turns.

Accordingly, this AD requires replacing the nose wheel steering servo valve manifold, incorporating revised operating procedures into the AFM, doing a records inspection for any incidents of un-commanded nose wheel steering turns, and reporting the results to the FAA. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC