Wed, Jun 10, 2020
AD 2020-11-13 Prompted By A Determination That It Is Necessary To Do A Replacement With New Nacelle Attachment Fittings
The FAA is superseding Airworthiness Directive (AD) 2010-23-04, which applied to all De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes.
AD 2010-23-04 required repetitive detailed inspections of the nacelle attachment fittings for cracks, a conductivity inspection of the nacelle attachment fittings, and replacement if necessary. This AD continues to require these inspections and replacement if necessary, removes a certain inspection requirement for certain airplanes, and adds a new requirement to replace the rear spar fitting and nacelle attaching structure with a new nacelle attachment fitting. This AD was prompted by a determination that it is necessary to do a replacement with new nacelle attachment fittings. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 14, 2020.
Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian AD CF-2010-30R2, dated July 30, 2019, (also referred to as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for all De Havilland Aircraft of Canada Limited (Type Certificate previously held by Bombardier, Inc.) Model DHC-8-400, -401, and -402 airplanes. You may examine the MCAI in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0099.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2010-23-04, Amendment 39-16493 (75 FR 68174, November 5, 2010) (“AD 2010-23-04”). AD 2010-23-04 applied to all De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. The NPRM published in the Federal Register on March 12, 2020 (85 FR 14423). The NPRM was prompted by reports of cracked nacelle attachment fittings, which a preliminary investigation determined to be caused by stress corrosion, and a determination that it is necessary to install new nacelle attachment fittings in order to address the unsafe condition. The NPRM proposed to continue to require repetitive detailed inspections of the nacelle attachment fittings for cracks, a conductivity inspection of the nacelle attachment fittings, and replacement if necessary. The NPRM also proposed to remove a certain inspection requirement for certain airplanes, and add a new requirement to replace the rear spar fitting and nacelle
attaching structure with a new nacelle attachment fitting. The FAA is issuing this AD to address reports of cracked nacelle attachment fittings, which, if not detected and corrected, could compromise the structural integrity of the nacelle attachment fitting and possibly result in collapse of the landing gear. See the MCAI for additional background information.
More News
Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]
Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]
Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]
From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]
Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]