Mon, Sep 05, 2005
The Seawind Company has elected to
complete certification of the Seawind 300C with the Continental
IO-550-N and to offer the Full Authority Digital Engine Controls
(FADEC) as an option. Company President, Richard Silva, said the
selection was based on the Continental engine meeting and exceeding
the criteria of a smooth running 6 cylinder 300 horsepower engine.
The IO-550-N produces 310 H.P. with no increase in weight.
“We are excited with the selection of the new power plant.
It will give us increased performance, reduced pilot work load and
significant fuel savings.” Silva (pictured below)
explains.
“We are also following, with great interest, the progress
being made in certifying this engine with FADEC for 94 octane auto
gas.”
Offering the certified FADEC as an option provides the latest
technology in power plant design and provides 5% more take off
power as well as a 15% reduction in fuel consumption. Seawind has
also selected the Hartzell Scimitar propeller which is estimated to
boost performance by 3%. Combining all of these positive
developments should result in an increase of over 6% in cruise
power over the original 300 HP power plant. Take off power for
amphibious aircraft is more critical than for land planes, with the
FADEC, the certified Seawind will achieve over 11% increase in take
off power. All of this is an estimate and Seawind will not increase
its published performance specifications until the flight test
results are confirmed and certified this fall. Instead, the proven
specifications of the 300 HP kit versions will continue to be used.
The Seawind is the fastest amphibian in the world having achieved
200 MPH top speed.
Silva says “During the certification process we have been
paying close attention to detail. With the latest 3D modeling
technology we have achieved mold and assembly tolerances within
thirty thousandths of an inch. We recorded every minor improvement
that we wished we could have made in the kit version and have
included them into the new certified tooling. For example, an
additional upgrade to the certified Seawind will result in
considerable drag reduction from the new trailing link landing gear
which now tucks fully into the wings.”
First articles for final flight testing will be rolled out this
fall. The certified Seawind 300C should complete flight testing and
certification this year.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]