Thu, Jun 15, 2006
Aero-Tips!
A good pilot is always learning -- how many times have you heard
this old standard throughout your flying career? There is no truer
statement in all of flying (well, with the possible exception of
"there are no old, bold pilots.") It's part of what makes aviation
so exciting for all of us... just when you think you've seen it
all, along comes a scenario you've never imagined.
Aero-News has called upon the expertise of Thomas P. Turner,
master CFI and all-around-good-guy, to bring our readers -- and us
-- daily tips to improve our skills as aviators, and as
representatives of the flying community. Some of them, you may have
heard before... but for each of us, there will also be something we
might never have considered before, or something that didn't
"stick" the way it should have the first time we memorized it for
the practical test.
It is our unabashed goal that "Aero-Tips" will help our readers
become better, safer pilots -- as well as introducing our
ground-bound readers to the concepts and principles that keep those
strange aluminum-and-composite contraptions in the air... and allow
them to soar magnificently through it.
Look for our daily Aero-Tips segments, coming each day to you
through the Aero-News Network. Suggestions for future Aero-Tips are
always welcome, as are additions or discussion of each day's tips.
Remember... when it comes to being better pilots, we're all in this
together.
Aero-Tips 06.15.06
Radios dead, you flew the proper route and
altitude to your clearance limit. When can
you leave the clearance limit and proceed? The Aeronautical Information Manual
(AIM) tells us:
- When the clearance limit is a fix from which an
approach begins:
-
- commence descent or descent and approach as close as possible
to the Expect Further Clearance (EFC) time if
one has been received; or
- if an EFC has not been received, as close as possible to the
Estimated Time of Arrival (ETA) as calculated from
the filed or amended (with ATC) Estimated Time En Route (ETE).
- If the clearance limit is not a fix from which an
approach begins (note: with the
proliferation of "direct to destination" clearances in many
locations this may well be the situation if you lose
comm.):
-
- leave the clearance limit at the EFC time if one has been
received: or
- if no EFC has been received, upon arrival over the
clearance limit and
-
- proceed to a fix from which an approach begins and
- commence descent or descent and approach as close as possible
to the ETA as calculated from the filed or amended
(with ATC) ETE.
In this latter case, pick the most logical approach given your
best judgment of the approach in use or the approach that makes
most sense to you. Controllers will earn their pay clearing
your path of other traffic.
Aero-tip of the day: If "lost comm" in
IMC fly the approach that provides the best chance of success, at a
time when ATC knows to get others out of your way.
More News
Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]
A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]
Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]
Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]
From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]
Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative
See All