NTSB Prelim: Schweizer SGS135 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Wed, Jun 29, 2022

NTSB Prelim: Schweizer SGS135

Pilot Was Found Strapped In His Parachute And Harness With The Canopy Closed

Location: Midlothian, TX Accident Number: CEN22FA224
Date & Time: June 5, 2022, 16:30 Local Registration: N2817H
Aircraft: Schweizer SGS135 Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On June 5, 2022, about 1630 central daylight time, a Schweizer SGS135C glider, N2817H, was undamaged when the pilot was found deceased after a landing near Midlothian, Texas. The glider was operated under the provisions of Title 14 Code of Federal Regulations Part 91 as a personal flight.

According to members of the Texas Soaring Association (TSA), the pilot was launched via a towplane around 1500 that day. About 1700, the glider was found by another pilot when he landed at the TSA Gliderport (TA11), Midlothian, Texas. The pilot was found strapped in his parachute and harness with the canopy closed about 150 yards from the intended landing area in an open pasture. None of the members recalled hearing any landing radio calls or distress calls from the pilot.

Examination of the glider found the flaps in the landing position, with the handle locked in the detent. Flight control continuity was established from the controls to the flight surfaces. The left aileron connection from the push rods to the aileron idler horn had the Clevis pin improperly secured and was missing the LSP-1 safety pin which was not located within the fuselage. Despite being partially unseat, the Clevis pin was seated enough for operation of the aileron. No other anomalies were detected with the airframes. Members of the TSA assisted in the disassembly and transportation of the glider from the landing site to the pilot’s hangar. During disassembly, no obvious damage was noted to the glider.

The pilot was 84-years old and had been flying since at least 1973. Glider pilots are not required to hold a medical certificate of any class, and the pilot was flying under that provision. His last Federal Aviation Administration medical certificate was issued on January 5, 2012. On that application, the pilot reported having accrued 3,700 total hours. An autopsy and toxicology testing were ordered for the pilot.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.17.24): Very High Frequency

Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]

ANN's Daily Aero-Linx (05.17.24)

Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: ANN Visits Wings Over The Rockies Exploration Of Flight

From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]

Airborne Affordable Flyers 05.16.24: PRA Runway, Wag-Aero Sold, Young Eagles

Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC