FAA Issues SAIB For Ercoupe Elevator Controls | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Mar 22, 2013

FAA Issues SAIB For Ercoupe Elevator Controls

Problem Found During Restoration Of An Ercoupe 415-C

The FAA has issued a Special Airworthiness Information Bulletin concerning elevator controls in Ercoupe 415 model airplanes. The FAA received a field report of a loose elevator horn on an Ercoupe 415-C during restoration of the airplane. Although the external appearance of the elevator was unremarkable, teardown of the elevator revealed the elevator horn attach bracket had only one secure fastener out of four as a result of severe corrosion where the steel elevator control horn attached to the aluminum lateral stiffener. Investigation indicated dissimilar metals (steel attached to aluminum), and the corrosion prevention means of this vintage, were the primary cause of the corrosion. Similar undetected corrosion could occur on other airplanes of this type featuring elevators with a continuous compared to the split-type) trailing edge.

Later model Ercoupe series airplanes using an aluminum (not steel) elevator control horn in conjunction with the split-type trailing edge are not subject to this SAIB. As originally designed, this area of the elevator has no adequate means of internal inspection. Univair Aircraft Corporation has issued Service Bulletin No. 34, dated January 4, 2013, to address this limitation and minimize the potential of corrosion going undetected before it exceeds 25 percent of the cross sectional area. The service bulletin adds two round holes (aft of the aluminum elevator stiffener) and one trapezoidal hole (forward of the stiffener) to provide inspection access through the lower elevator skin.

The FAA recommends that all owners and operators of the Univair airplanes identified in the introduction of this SAIB comply with Univair Aircraft Corporation Service Bulletin No. 34, dated January 4, 2013. If corrosion is found upon compliance with this service bulletin or during subsequent inspections, the FAA recommends it be reported it to the FAA.

(Ercoupe 415-C image from file released to Public Domain)

FMI: Send a Reporthttp://univairparts.com

Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC